MacOS: USB to Serial stopped working
Posted: Fri Nov 20, 2026 4:18 pm
No idea what happened, but CoolTerm has worked flawlessly for so long that I don't know if I had to do any magic initially (like FTDI drivers or such) to make it work. But it has stopped working and I can't make it see the Serial port my TEC-1G is on. This is the error I get:
The serial port "usbserial-A5XK3RJT" is not available.
The specified serial port could not be found. Please reconnect your serial port device or select a different port.
I go in to try selecting a different port but the USB2Serial is not listed. So it must be a driver problem, right?
It's a little red FTDI USB-C to TTL board.
MacMini running MacOS 26.6.2
Was working fine. Booted up this moring and not working now. So annoying
The serial port "usbserial-A5XK3RJT" is not available.
The specified serial port could not be found. Please reconnect your serial port device or select a different port.
I go in to try selecting a different port but the USB2Serial is not listed. So it must be a driver problem, right?
It's a little red FTDI USB-C to TTL board.
MacMini running MacOS 26.6.2
Was working fine. Booted up this moring and not working now. So annoying